As a machine for the temporary startup problem wiring for cars

As a machine for the temporary startup problem wiring for cars

As we already know to start a car: the car keys should be inserted in the ignition to start the engine. However, there are times when the engine does not start would not be a negative reaction from a temporary power systems of the card or the machine is not used for a long time. When this happened, the best proposal, the direct connection of wires from the battery to the starter body is used to start the engine. Usually if the battery is fully charged, the only direct connection shouldjust enough to start the engine and start it. To do this, the following are important tools needed to perform the operation.

Here are the tools that are necessary for the implementation of the task mentioned above:
1 A year and a half meters long wire color (ie black or red)
2 A battery clip.
3 A wire cutter.

To prevent your car from completely after seeing the task of wiring, damaged, you must be very careful on the steps above as follows:

a) the end of the rope
b)Battery is full and sign the car keys to ON
c) Connect the red wire to the battery clip to the (+) battery.
d) Press the red starter cable connection, confirm to start the car.

Once you hear the engine start, stop touching the red wire at the end of the car-starter in order to prevent the loss of the entire electrical system. Looking for support if you have trouble. Follow these steps to protect the wiring is not damagedcompletely.

hammock tent